It is currently Sat Aug 19, 2017 4:51 pm

All times are UTC




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: k8095 static
PostPosted: Thu Apr 13, 2017 3:33 am 
Offline
Member
Member

Joined: Thu Apr 13, 2017 3:27 am
Posts: 4
Just built the k8095 MP3 player and the sound is very low and full of static. All voltage readings seem to be fine. 3.3V and 5V from the regulators, 12V from the amplifier, 0V on pin 5 with the SD in and 3.3 without, and 3V at the decoder. The sound is the same with the headphone and RCA output.


Top
 Profile  
 
 Post subject: Re: k8095 static
PostPosted: Thu Apr 13, 2017 5:44 am 
Offline
User avatar
Velleman Support
Velleman Support

Joined: Mon Dec 11, 2006 12:03 pm
Posts: 4926
Location: Belgium
Is the sound equal on both channels?
If not yet done, please try with other brand SD card.


Top
 Profile  
 
 Post subject: Re: k8095 static
PostPosted: Fri Apr 14, 2017 6:49 pm 
Offline
Member
Member

Joined: Thu Apr 13, 2017 3:27 am
Posts: 4
The sound is equal. I have also tried two different SD cards with the same result. The sound is so low that I have to concentrate to hear it through the static. Because I can at least hear the music the decoder must be doing its job, which makes me think its the amplifier. I there a way to test the amplifier with a multimeter?


Top
 Profile  
 
 Post subject: Re: k8095 static
PostPosted: Fri Apr 14, 2017 7:19 pm 
Offline
User avatar
Velleman Support
Velleman Support

Joined: Mon Dec 11, 2006 12:03 pm
Posts: 4926
Location: Belgium
Quote:
I there a way to test the amplifier with a multimeter?
The only you can do is to check the voltages on the amplifier pins.
The results may indicate possible problem.
Here are the voltages on the amplifier pins:
1: 2.1V
2: 0V
3: 5.8V
4: 5.8V
5: 0V
6: 5.8V
7: 12V
8: 12V
9: 2.1V

You can use the middle connector of the speaker terminals as ground reference.


Top
 Profile  
 
 Post subject: Re: k8095 static
PostPosted: Sat Apr 15, 2017 6:24 pm 
Offline
Member
Member

Joined: Thu Apr 13, 2017 3:27 am
Posts: 4
I'm getting
1. .86 v
2. 0v
3. .6v
4. .73v
5. 0v
6. .85v
7. 12v
8. 12v
9. .86v

Pin 1 and 2 of the decoder has 1.2 v
C22 and 23 have .8v on the + legs


Top
 Profile  
 
 Post subject: Re: k8095 static
PostPosted: Sat Apr 15, 2017 7:10 pm 
Offline
User avatar
Velleman Support
Velleman Support

Joined: Mon Dec 11, 2006 12:03 pm
Posts: 4926
Location: Belgium
Is the amplifier oriented so that the notch on the IC matches the notch on the silkscreen?


Top
 Profile  
 
 Post subject: Re: k8095 static
PostPosted: Sat Apr 15, 2017 7:57 pm 
Offline
Member
Member

Joined: Thu Apr 13, 2017 3:27 am
Posts: 4
yes the notch is correct, the text on the amplifier is facing the same as the decoder


Top
 Profile  
 
 Post subject: Re: k8095 static
PostPosted: Sat Apr 15, 2017 8:02 pm 
Offline
User avatar
Velleman Support
Velleman Support

Joined: Mon Dec 11, 2006 12:03 pm
Posts: 4926
Location: Belgium
OK
It seems the amplifier may be defective.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group